Shanghai Sunland Industrial Co., Ltd is the top manufacturer of Personal Protect Equipment in China, with 20 years’experience. We are the Chinese government appointed manufacturer for government power,personal protection equipment , medical instruments,construction industry, etc. All the products get the CE, ANSI and related Industry Certificates. All our safety helmets use the top-quality raw material without any recycling material.
How about the shelf life of safety helmet
We provide exclusive customization of the products logo, using advanced printing technology and technology, not suitable for fading, solid and firm, scratch-proof and anti-smashing, and suitable for various scenes such as construction, mining, warehouse, inspection, etc. Our goal is to satisfy your needs. Demand, do your best.
Professional team work and production line which can make nice quality in short time.
The professional team provides 24 * 7 after-sales service for you, which can help you solve any problems
Safety helmet, – Also for ,heights,. As with many other tasks, it is also important to use a ,safety helmet, when you ,work at heights,. It might seem a bit unnecessary if you ,work, in an area with no risk of fallen objects, however, the purpose of the ,helmet, is not only to protect you from impacts from above.
Safety, Regulations on ,Working at Height, and a Brief Introduction to ,Safety, Regulations related to Electrical Works on Construction Sites and Codes of ... (Version 4.0 replaces Version 3.1 and takes effect on ,26, March 2018) ... The GN prevails regarding the specifications and use of the ,safety helmets,. Confined Spaces ,Safety, Training ...
Work at height, means ,working, in a place (except a staircase in a permanent workplace) where a person could be injured by falling from it, even if it is at or below ground level. ,Work at Height, Regulations 2007 5 ,Work at Height,:Layout 1 30/11/2007 12:25 Page 5
4/9/2017, · Detailed information on ,safety, equipment used ,for working at height, is covered in the Good Practice Guidelines ,for Working at Height, in New Zealand and other WorkSafe NZ guidance on ,working at height,. Further information about ,working at height, which supplements these guidelines is available on the Preventing falls from ,height, page on our website.
Safety helmets, must be worn when performing most construction works, works in the vicinity of lifting equipment (cranes, hoists, etc.) and suspended loads, works in forestry, works in cisterns, wells, shafts, tunnels, etc. In these situations the use of a ,safety helmet, will help protect against injuries to the scalp, skull and cervical vertebrae.
Working At Heights, Introduction. This guideline makes reference to the provisions regarding ,working at heights, in the (Regulation for Industrial Establishments Reg. 851) and the (Regulation for Construction Projects O. Reg. 213/91) and also outlines best practices, procedures and equipment for film and television production.The Regulation for Construction Projects applies during the ...
NR31 – Health and ,Safety, at ,Work, in Agriculture, Livestock, Forestry, Logging and Aquaculture; NR32 – Health and ,Safety, at ,Work, in Health Services; NR33 – ,Working, in Confined Spaces; NR34 – ,Working, Conditions and Environment in Naval Construction and Repair Industry; NR35 – ,Working at Heights
This Standard specifies ,requirements, for occupational protective ,helmets, to protect wearer's heads from falling objects in building and construction, quarrying, shipbuilding, forestry and other occupations with similar hazards.These ,requirements, include the construction and materials of the ,helmet, shell and head harness, mechanical strength of the shell and finish of the ,helmet,.Methods of test ...
4. Personal Protective Equipment (,For Work at Heights,) 09 4.1 Full Body Harness 09 4.1.1 Definition 09 4.1.2 Classification of Full Body Harnesses 09 4.1.3 Minimum Breaking Strength of Full Body Harness 12 4.1.4 Selection of Full Body Harness for Different ,Working, Environments 12 4.1.5 Procurement, Markings and Identity Label 14
3/12/2019, · It could be from a ladder, a roof’s edge, through an opening on the floor, even a loading dock can be ,working at height,. In general industry, fall protection is required by OSHA for any ,height, change of 4 feet or more. Here are ten ,safety, tips to help mitigate the risk of ,working at height,. 1. Use Railing. When you can, use railing.